EDID for a B154EW01 panel, version v4, with an i1501 tag that likely refers to the laptop the dump came from. The 256-byte data block reports panel vendor, timings and preferred resolution to the graphics chip. It is used to restore a display EEPROM after corruption, when the internal screen goes black or the system selects a generic mode. Write it over I2C with a programmer or EDID tool. Check that the installed panel is B154EW01 version v4, and dump the original contents before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (8)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @pepeelectronica | 20 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 26 Apr 2022 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 29 Apr 2025 | Open file on RM Schematics |
| @schematics_bios | 23 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 2 Aug 2026 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →