Oldest build in this ICP LP D series, version 130.1.30.1032, a production firmware component for Intel Ice Lake platforms using the Ice Point PCH. The 108 KB file is a module and must be placed in a complete SPI image, typically with Intel's Flash Image Tool, before flashing. Early revisions are handy when the board's original image used them. Check variant and stepping, compare with the existing dump, and save the original chip contents with a programmer first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →