ICP 130.1.30.1048 LP D PRD

BIOS .bin 108 KB Shared

Production ICP firmware block for Ice Lake low-power platforms, version 130.1.30.1048, tagged LP and D, likely the LP PCH at stepping D. The 108 KB file cannot be flashed as a BIOS; it is a module integrated into a complete SPI image. Technicians use such versions to replace a corrupted component or match firmware across a rebuilt image. Compare with the module extracted from the original dump and keep a verified backup of the chip before programming.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.

All sources (3)

The same file was posted more than once. If one link is dead, try the next.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files