A 128-byte EDID base block for the IDTech N150P3 display panel; no notebook model is named. That size is exactly one standard EDID block, which holds vendor and product identifiers, timing descriptors and the preferred resolution. Technicians use such a dump to restore a panel whose identification memory was corrupted, causing a black screen or wrong mode. It is written via I2C with a programmer or a software EDID tool. Verify the panel part number on its label and keep a backup of the existing data before overwriting.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →