Firmware image for the Compal LA-M542P mainboard, revision 1.0, carrying the ILG10 project code and a date of 2022-11-25. The archive holds a 32MB BIOS, so it targets a 256Mbit SPI flash device. Compal uses the LA- prefix for its laptop board numbers, and the revision silkscreened on the PCB should match before you reflash. Always dump and keep the existing chip contents first, since serial numbers and the board-specific region live there, and confirm your programmer reports the correct chip size.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 21 Jul 2024 | Open file on RM Schematics |
| @generalbios | 4 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →