Firmware image of 8 MB for a Starsat SF002 Pro satellite receiver, with a build date stamp in the name. The size matches a 64 Mbit flash chip, so it is likely a full image intended for programmer writing rather than a USB update file. It is used to recover a receiver stuck on boot or with corrupted software. Read and save the original flash before writing, check that the board and model match exactly, and confirm the chip capacity equals the image size.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tvsoftwareworld. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →