Firmware dump for the Intel DH55HC motherboard, intended for a Winbond W25Q64BV flash chip. That chip holds 64 Mbit, or 8 MB, which the image should match exactly. It is useful when the board fails to POST after a bad update or corrupted BIOS, using a CH341A or similar SPI programmer. The DH55HC is close to other Intel H55 boards, so verify the model on the PCB, save the existing chip read and check the size before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 9 Jan 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 9 Jul 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @pepeelectronica | 26 Apr 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 2 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →