SPI dump read from an Intel DH61CR desktop board, an H61-based Micro ATX model, supplied as a 2.95 MB RAR archive. Calling it a read means it was taken straight from a chip rather than built from a vendor update, so it may hold board-specific data such as the MAC address and serial. Use it to recover a board with corrupted firmware via a programmer like a CH341A. Back up your own chip, make sure the size matches it, and reset the LAN identifiers if needed.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 17 Feb 2019 | Open file on RM Schematics |
| @IT_SERVICE_WORLD | 29 Oct 2019 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →