Raw 4 MB binary firmware image labelled for an Intel H61 chipset desktop board. The name gives no board maker, model or revision. Treat it as a generic H61 dump that must be matched to the exact motherboard before use. Technicians normally write such images to the SPI flash chip with a programmer such as a CH341A when a board will not POST after a corrupted BIOS. Read and save the original chip contents first, and confirm the chip is 4 MB, since an image that does not match the flash capacity will not fit.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @desktopbios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →