Raw BIOS image for the Intel DG41WV desktop motherboard, a 2.00 MB binary matching a 16 Mbit SPI flash. A .bin file like this is written directly to the chip with a programmer when a board fails to post after a bad update or corruption. Check the flash part marking for a 2 MB capacity before writing, since a size mismatch will fail verification. Make a backup of the existing chip, because it holds the board's MAC address and serial data that a generic image may overwrite.</p>
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptop_bios_schematic. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →