INTEX LED-2208 TP.VST59.PB753 1920X1080 FHD

BIOS .bin 4.00 MB Shared

Firmware dump for the Intex LED-2208 television running on the TP.VST59.PB753 main board, configured for a 1920x1080 Full HD panel. The raw 4.00 MB BIN file corresponds to a 32 Mbit SPI flash, the usual size for such universal TV boards. Repair shops write this image to the board flash with a programmer to recover a dead, looping or wrong-resolution set. Panel resolution must match the fitted screen, so check it before flashing, and always save the original contents of the chip so you can return to it.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @gunvantrathore. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files