Firmware package for a board identified as IPISB-AG, revision 1.06, described in the name as a fully working BIOS. IPISB-AG is a board code seen on OEM desktop motherboards, but the name gives no brand or system model, so match the code and revision on the PCB before use. The 7.02 MB RAR should contain the image for the SPI flash. Dump and keep the existing chip first, compare its size with the extracted file, then program it with a CH341A or similar and verify the write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 9 Sept 2023 | Open file on RM Schematics |
| @generalbios | 12 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 19 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @generalbios | 29 Oct 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →