A 4 KB production binary tied to Intel Jasper Lake, per the JSP code, labelled version 13.5.0.1009. Its size rules out a full BIOS or ME region, so treat it as a single firmware block used when rebuilding an image with Intel's tools. A repair tech would use it to replace or compare one part of a damaged SPI dump. Make sure the version matches the CSME release on the board, and always read and save the original flash contents with a programmer before writing anything.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 6 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →