Second copy, marked (1), of the ENE KB9012QF firmware for Compal LA-9912P, the board used in the G405 and G505. The file is a 128 KB raw dump covering the controller's full flash. Keeping a duplicate is handy for comparing checksums or trying an alternate image when the first does not restore operation. The EC handles power button, charging and keyboard, so corruption usually means a dead laptop. Back up the chip's current content, then flash with a KB9012 programmer and verify.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 8 Mar 2017 | Open file on RM Schematics |
| @IT_SERVICE_WORLD | 29 Oct 2019 | Open file on RM Schematics |
| @canalesquematicos | 5 Jun 2021 | Open file on RM Schematics |
| @uzb4422 | 17 Feb 2023 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →