Main BIOS image for the Compal LA-8862P motherboard, saved in .hex format at 11.3 MB. The size points to a text-encoded hex file rather than a raw image, so it needs software that reads Intel HEX or a conversion to binary before it will fit the SPI flash chip. The main firmware is used to recover boards that power on but show no picture or loop endlessly. Confirm the LA-8862P marking on the PCB, back up the chip first, and check that the converted size matches the flash capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @bios_laptop | 15 Jun 2022 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 29 Apr 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →