Compal LA-D704P firmware image, 8 MB raw binary, marked as tested and working; the brand and model are not named. Compal uses LA-xxxxP numbers on its motherboards, so check that the label on your PCB matches exactly. The 8 MB size suits a 64 Mbit SPI chip; check the chip marking before programming. Use a CH341A or a similar programmer, save a backup of the original contents, then write and verify. This dump can restore a board whose BIOS chip is corrupted.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @ITHINKHS. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →