Firmware image for the Compal LA-D993P motherboard, described as a fresh ME and BIOS region, meaning the Intel Management Engine area has been regenerated rather than copied from a used board. The file is 16 MB, suiting a 128 Mbit SPI flash. Compal LA-xxxxP numbers identify the board itself, not the laptop brand, so confirm the code printed on the PCB. Back up the existing chip, keep its serial and MAC data if needed, then program and verify with an SPI programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @ITHINKHS. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →