BIOS dump for Compal motherboard LA-E122P with the Intel Management Engine region cleaned, provided as a 16.0 MB raw binary. The name does not say which laptop model uses this board. A clean ME image is handy when the original firmware is corrupted or the ME region causes boot or power problems. Write it with an SPI programmer after saving the existing chip contents, and check that LA-E122P is printed on the PCB and that the chip is 16MB.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @CLRINDORE. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →