BIOS image for the Compal LA-E311P mainboard with the Management Engine region cleaned, 16 MB in size for a 128 Mbit SPI flash chip. A clean ME image is used when the ME region is corrupted, causing problems such as no boot, slow boot or shutdowns after about thirty minutes. Write it with an external programmer after reading and saving the existing chip. Confirm the LA number printed on the board matches. Transfer the serial number and other unit data afterwards if they are missing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @ShareMan_Electronic_Files. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →