BIOS image for the Compal board LA-J281P revision 1.0, a 32.0 MB raw .bin sized for a 256 Mbit SPI flash. The name flags an SSD issue, meaning the dump came from a unit with an SSD-related fault, so it may be a reference read rather than a confirmed working file. Use it carefully: compare it with a known good image, back up the chip before any write with a CH341A or similar programmer, and confirm the LA-J281P code and revision printed on the PCB match before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @dtechbios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →