Latitude 5520 Service Tag BLANK CLEAN ME AND BIOS

BIOS .bin 32.0 MB Shared

Full 32 MB SPI flash image for the Dell Latitude 5520 with a blank Service Tag and a cleaned Management Engine region alongside the BIOS. A blank tag lets the original Service Tag be entered later, and the clean ME region avoids carrying over another machine's settings. Write it with a programmer such as a CH341A to a 32 MB chip, after saving the original contents, because that backup preserves the unit's own serial data. Make sure the motherboard actually belongs to a Latitude 5520 before flashing.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @zinfoservicebios. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files