Main firmware dump for the Samsung 1933SN LCD monitor, 128 KB, labelled 100 percent OK and BIOS in the name. The size fits a 1 Mbit SPI flash typically used by the scaler. Technicians program it to restore a monitor that shows no image, has a dead power button or freezes on the logo. Use a programmer such as a CH341A, save the original contents before erasing, and pair it with the matching EEPROM image when settings memory is also suspected.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 16 Feb 2017 | Open file on RM Schematics |
| @abgm_manutencao_bios | 10 Jul 2019 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →