Main firmware image of 128 KB for the Samsung SN2033 PLUS LCD monitor, marked as fully working. The name calls it BIOS, meaning the scaler firmware stored in the board's flash chip rather than the small EEPROMs at IC100 and IC201, which have their own dumps. Reflashing it with an SPI programmer can fix monitors that stay dark, blink the power light or freeze at start-up. Check the chip capacity matches 128 KB, save the original read first, and verify after writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 22 Feb 2017 | Open file on RM Schematics |
| @led_software | 17 Jan 2019 | Open file on RM Schematics |
| @abgm_manutencao_bios | 10 Jul 2019 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →