EEPROM image of 1 KB for the Samsung SN2033 PLUS monitor, read from position IC201 and marked as fully working. It belongs with the other EEPROM and main firmware dumps for this monitor, and each must go to its own chip. Small I2C EEPROMs in monitors hold settings and panel data, and their corruption can cause start-up or display faults. Program it with a tool that supports 24Cxx parts, after backing up the original contents and checking the chip capacity matches the file.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 22 Feb 2017 | Open file on RM Schematics |
| @led_software | 17 Jan 2019 | Open file on RM Schematics |
| @abgm_manutencao_bios | 8 Aug 2019 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →