LCD XEROX (MODEL NO XL775K)EPROM100%OK

BIOS .bin 2.00 KB Shared

Small 2 KB EEPROM dump for a Xerox LCD monitor, model XL775K, marked in the name as fully working. A file of this size typically comes from a serial EEPROM (24Cxx class) that stores monitor settings, EDID or calibration data rather than the main scaler firmware. It is useful when a monitor shows no picture, wrong resolution or locks up after the EEPROM data gets corrupted. Read and keep the original chip contents before writing, and check the chip capacity matches 2 KB so the image fits.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files