Firmware dump for a 19-inch Samsung LED monitor, model S19G310N, read from a Winbond W25X40 flash chip, a 4 Mbit SPI part. The name also states the main controller as SE1059LMHL-NT. Monitor firmware like this is used to revive units stuck with no picture, flashing logo or dead buttons after the flash content gets corrupted. Program it with a CH341A or similar programmer, saving the original chip first, and make sure the image is exactly 512 KB to fit the W25X40.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 13 Mar 2019 | Open file on RM Schematics |
| @IT_SERVICE_WORLD | 29 Oct 2019 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →