Small 1.00 KB binary labelled for the Samsung SA300 LED monitor, model S20A300B. A file this size is far too small to be scaler firmware and most likely holds the EEPROM contents, such as EDID or settings data, typically read from a 24Cxx serial EEPROM. Writing it back can cure a monitor that loses its settings, reports a wrong identity to the PC or misbehaves after a corrupted EEPROM. Use an I2C-capable programmer, save the current contents first, and do not confuse it with the 512 KB main firmware image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 29 Jan 2017 | Open file on RM Schematics |
| @biosarchive | 30 Jan 2017 | Open file on RM Schematics |
| @abgm_manutencao_bios | 8 Aug 2019 | Open file on RM Schematics |
| @generalbios | 29 Sept 2023 | Open file on RM Schematics |
| @generalbios | 29 Sept 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →