lede-17.01.6-ar71xx-generic-tl-mr3220-v2-squashfs-factory

BIOS .bin 3.75 MB Shared

LEDE 17.01.6 factory firmware for the TP-Link TL-MR3220 v2 router, ar71xx generic target, SquashFS root filesystem, 3.75 MB binary. A factory image is meant to be flashed from the stock TP-Link web interface when replacing the original firmware, while sysupgrade images are used from an existing OpenWrt or LEDE install. Check the hardware version on the router label, since v1 and v2 differ. Devices with small flash leave little room for packages, and a TTL serial connection helps recover a failed flash.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.

All sources (2)

The same file was posted more than once. If one link is dead, try the next.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →