A 2 KB binary linked by name to a Lenovo machine and the LP140WF3 panel, with an spd1 suffix. That size is larger than a standard 128 or 256 byte EDID, so it may be a full EEPROM read padded to the chip capacity rather than just the identification block; the name gives no further details. It is meant for restoring panel data on the display EEPROM using an I2C programmer. Inspect the header in a hex editor, compare with the target chip size and back up the original contents before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →