BIOS dump for the Lenovo IdeaPad 310S-14AST using the Compal board LA-D541P, revision 1.0. The AST suffix in Lenovo naming refers to an AMD-based configuration, and Compal prints the LA number and revision on the motherboard. The file is intended for rewriting the SPI flash with a hardware programmer when the system will not boot or shows no display. Read and store the original firmware before writing, and make sure the image size matches the chip fitted on the board.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 12 Jan 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 9 Jul 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →