Firmware for the Lenovo IdeaPad Flex 15 with board DA0ST6MB6F0 revision A, read from a Winbond 25Q64FVSIQ flash chip, which holds 8 MB. The DA0 prefix follows Quanta board numbering. The 3.51 MB RAR should unpack to an image sized for that chip, ready to write with an SPI programmer when the laptop is bricked or fails to post. Check the PCB markings and revision, verify the chip type on your board, and back up the original contents before erasing or writing anything.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 27 Oct 2018 | Open file on RM Schematics |
| @IT_SERVICE_WORLD | 28 Oct 2019 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →