Firmware dump for the Lenovo IS7XM motherboard, revision 1.0, marked as tested and working, packed in an 11.1 MB RAR. The archive size suggests it may include more than a single image, so check its contents before use. A tested dump is used to reprogram the SPI BIOS chip on a desktop that fails to boot after corruption. Even with a working label, read and save the original chip first, match the revision on the PCB, and verify the image size against the flash capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 4 Dec 2021 | Open file on RM Schematics |
| @laptopchiplevelexpert | 31 Dec 2021 | Open file on RM Schematics |
| @BiosSchematicWorld | 31 Dec 2021 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @bios_files_Request | 4 Apr 2023 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →