Panel EDID taken from a Lenovo ThinkPad Tablet fitted with an LG LP101WX1 display, revision SLN3 according to the name. The 256-byte binary is the identification block the screen reports to the system so it can configure timings and native resolution. Technicians restore it when a tablet shows a black or garbled screen after the panel memory was corrupted or the panel was swapped. A programmer that talks I2C, such as a CH341A with a clip, is normally used. Back up the existing data and confirm the panel label before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (9)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @BiosSchematicWorld | 4 Feb 2022 | Open file on RM Schematics |
| @pepeelectronica | 20 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
| @schematics_bios | 23 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →