Firmware image for the 2018 Lenovo ThinkPad X1 Yoga 3rd gen with LRV3 mainboard 17800-1, marked as a fully working BIOS. Packed as a 7.5 MB RAR, it is a separate dump from the other LRV3 file and can serve as an alternative if one image fails to boot. The 17800 numbering follows Wistron, the ODM that built this board. Before flashing, back up the original SPI chip, verify the board number on the PCB, and check the dump length equals the chip size, otherwise the programmer will refuse or the machine will not start.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 17 Aug 2023 | Open file on RM Schematics |
| @generalbios | 26 Nov 2023 | Open file on RM Schematics |
| @generalbios | 4 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →