LENOVO TYNI IS1XX1H VER 1.0 OK BIOS

BIOS .bin 16.0 MB Shared

Lenovo BIOS image of 16 MB for a board labelled TYNI IS1XX1H, version 1.0, marked as OK by the original source, suggesting a working dump. The name does not give the retail model, so the board code is the main reference to check against the PCB. A raw binary like this is programmed into a 128 Mbit SPI flash chip with a hardware programmer to recover a board with corrupted firmware. Make sure the chip is 16 MB and save a read of the existing contents before erasing or writing.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptopomi. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files