Firmware dump for an LG 1953 SE monitor, most likely the W1953SE, supplied as a raw 256 KB binary. That size matches a 2 Mbit SPI flash such as the W25X20 commonly found on these scaler boards. A technician writes the file directly to the chip with a CH341A or similar programmer to recover a unit stuck in standby or showing no picture. Keep a copy of the original contents first, confirm the chip capacity on the board, and verify the write by reading back and comparing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →