Base copy of the version 1.20 firmware for the LG 19EN33S monitor, packed as a zip of about 171 KB. The name specifies a Winbond W25X40 SPI flash of 512 KB, the memory used by the main scaler board to hold its program and settings. It is used to restore a unit with corrupted firmware by writing the chip directly with a CH341A or similar programmer. Check that the chip on your board carries the same marking, read and store the original image, and verify the write before reassembling the monitor.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 27 Feb 2018 | Open file on RM Schematics |
| @abgm_manutencao_bios | 8 Aug 2019 | Open file on RM Schematics |
| @biositechyangiyer | 19 May 2020 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →