LG 19EN33S monitor firmware image, version 1.44, checksum 5970, built 2013-07-09, revision 400, supplied as a 384 KB bin file. Comparing it with other builds for the same model helps when one version fails to restore picture or controls. Flash it to the scaler board SPI chip with an external programmer after reading out and keeping the original dump. Confirm that the chip size suits the image and that the main board revision matches, because firmware from a different board variant can leave the screen blank.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 1 Jul 2018 | Open file on RM Schematics |
| @bios_files_Request | 24 Dec 2022 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →