Main flash dump for the LG 32LK330 television, taken from board EAX64290501 revision 0, saved as a 1.00 MB binary. LG prints this EAX number on the main PCB, so the code and revision on your board should match before the file is written. The size corresponds to an 8 Mbit SPI chip, programmed with a standard programmer to recover from boot or standby faults. Read and keep the existing chip contents first, and verify the programmed data afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →