LG 55LM615S television dump for main board EAX64317403, read from a Macronix 25L8006E serial flash, which is an 8 Mbit part matching the 1.00 MB size. LG prints the EAX number on the main PCB, so check that it matches your board exactly before programming. The image is used to restore corrupted firmware causing boot loops or a dead set, written with an SPI programmer. Save the original chip contents first and verify the written data afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →