Firmware for the LG E1941S monitor, specifically the E1941S-BNX version, delivered as a zip of roughly 100 KB. The name shows a 256 KB image for a Winbond W25X20 serial flash, a 2 Mbit chip that carries the scaler code. Matching the full model suffix on the rear label helps avoid flashing firmware meant for another variant. Use an SPI programmer with a clip on the unpowered board, read and archive the existing contents, then write the image and verify it before testing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 27 Feb 2018 | Open file on RM Schematics |
| @abgm_manutencao_bios | 8 Aug 2019 | Open file on RM Schematics |
| @biositechyangiyer | 19 May 2020 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →