EEPROM dump for the LG Flatron L1960TQ monitor read from an AT24C16 serial EEPROM. At under 1 KB this is not the scaler firmware but the small 2 KB memory that keeps settings, calibration, panel data and sometimes the hours counter. Technicians rewrite it when a monitor has wrong colours, a locked OSD, or will not start because of corrupted settings. Use an I2C capable programmer, save the existing EEPROM contents first, and confirm the chip marking on the board is a 24C16.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 13 Mar 2017 | Open file on RM Schematics |
| @abgm_manutencao_bios | 8 Aug 2019 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →