EEPROM dump for the LG Flatron M1710A, taken from a 24C02 serial memory and exactly 256 bytes, the full capacity of that chip. It holds settings such as calibration, configuration and sometimes the EDID rather than the main firmware. Technicians rewrite it to fix wrong colours, lost settings or a set that will not start correctly. Use an I2C programmer, read and save the current EEPROM contents first and check that the chip on the board really is a 24C02 before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 13 Mar 2017 | Open file on RM Schematics |
| @abgm_manutencao_bios | 8 Aug 2019 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →