Monitor ROM for the LG L1752S, provided as a zip archive of about 72 KB with a 256 KB image. The flash chip is not named, so inspect the SPI memory near the scaler and set the programmer to that exact part; a 256 KB image needs a 2 Mbit device. Technicians use dumps like this to restore damaged firmware on boards that start but show nothing or behave erratically. Always read and save what is currently on the chip, then write the image and run a verify before refitting the board.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 27 Feb 2018 | Open file on RM Schematics |
| @biositechyangiyer | 19 May 2020 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →