Archived flash image for the LG W1954S-PF LCD monitor, taken from a 25X20 type SPI chip, a 2 Mbit serial flash. The RAR is 61.5 KB, so expect a compressed 256 KB binary inside. It is used to rewrite the scaler firmware when a monitor shows no picture, hangs at power-on or ignores front buttons. Identify the flash chip on the main board, confirm it is the same 25X20 family, read and store its contents, then write the image with a CH341A or similar programmer and verify."}
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 12 Feb 2017 | Open file on RM Schematics |
| @biosarchive | 13 Mar 2017 | Open file on RM Schematics |
| @biosarchive | 28 May 2019 | Open file on RM Schematics |
| @abgm_manutencao_bios | 10 Jul 2019 | Open file on RM Schematics |
| @IT_SERVICE_WORLD | 29 Oct 2019 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →