An EDID dump for the LG LP133WH1 laptop LCD panel, revision codes TL and A1 as given in the name. At 256 bytes it holds the display identification data the panel reports to the graphics controller over the DDC/I2C lines. Technicians write such an image back to the panel EEPROM with an I2C-capable programmer such as a CH341A when a panel shows no picture, a wrong resolution or is not detected. Read and save the existing contents first, and confirm the panel label matches LP133WH1 TL A1 before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →