EDID binary for an LG LP133WH2 LCD panel, TL type, F2 revision, with a size of 256 bytes that suits a 24C02 EEPROM. The display identification data lets the laptop choose correct timings and recognise the panel by name. Technicians program it when the screen shows no image, reports an unknown monitor or picks the wrong resolution due to a corrupted chip. Make sure the F2 revision matches the panel label, verify the checksum, and back up the existing EEPROM before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →