128-byte EDID dump for an LG LP140WH1 panel, TL type, revision C1. The block contains vendor and product IDs, supported timings and a checksum read by the graphics hardware from the panel EEPROM. Use it to restore identification on a screen that is no longer recognised or runs at a fallback mode. Because the C6 revision is a 256-byte file, check which version matches the label on your panel and read out the original memory before writing this one.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →