Stored EDID for an LG LP140WH2 LCD matrix, TL variant, A1 revision, as a 256-byte binary. The data describes the panel to the system over DDC so the correct native timing is applied. A known-good copy like this is written back when the screen shows no picture, wrong resolution or an unknown display entry because of damaged identification data. Match the revision on the panel label, check the checksum in an EDID viewer and back up the original chip before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →