EDID for an LG LP140WX1 display, TL type, revision 01, in a 128-byte file. This standard base block lets the notebook identify the panel and select the right timings. Restoring it with an EEPROM programmer or EDID tool is a common repair for a panel that stays dark, shows a generic monitor name or offers the wrong resolution. Open the image in an EDID viewer to check its checksum, confirm the panel label matches, and back up whatever the chip currently holds.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →